Home › Guides › How to read a RAM label
How to read a RAM label: 1Rx8, PC4-2666V-SA1 and part numbers decoded
Updated 13 September 2026
Every memory module carries a label with two lines that tell you everything about it. The first is a standard JEDEC description that every manufacturer writes the same way; the second is the maker’s own part number. Once you can read both, you can identify any module in a few seconds — and check that what you are buying matches what you have.
The first line: 8GB 1Rx8 PC4-2666V-SA1-11
Take a typical DDR4 laptop module. Its label reads something like
8GB 1Rx8 PC4-2666V-SA1-11. Piece by piece:
| 8GB | Capacity of this one module. |
|---|---|
| 1Rx8 | Rank and chip width. 1R is single-rank, 2R dual-rank, 4R or 4DR quad-rank (server modules). x8 means each chip is 8 bits wide; x4 chips are used on server modules and x16 on some cheaper laptop ones. For a laptop or desktop, the number before the R is what matters; for a server, both do. |
| PC4 | The generation: PC3 is DDR3, PC3L is low-voltage DDR3L, PC4 is DDR4, PC5 is DDR5. |
| 2666 | The speed in MT/s, which everyone calls MHz. On DDR3 labels this number is the bandwidth instead: PC3-10600 is 1333MHz, PC3-12800 is 1600, PC3-14900 is 1866. DDR4 and DDR5 labels use the plain speed (2133, 2400, 2666, 2933, 3200; 4800, 5600). |
| V | The latency grade, a letter standing in for the CAS latency. On DDR4: P = CL15 (2133), T = CL17 (2400), V = CL19 (2666), Y = CL21 (2933), AA = CL22 (3200). DDR5 labels use A, B or C as a latency bin within each speed, and B is the common one. It always goes with the speed, so you never need to choose it. |
| S | The form factor, and the letter to check hardest. S is a SODIMM (laptop), U an unbuffered desktop DIMM, E an ECC unbuffered DIMM, R a registered server DIMM, L a load-reduced server DIMM, T an ECC SODIMM. |
| A1-11 | The raw card and revision — the reference PCB design the module was built on. Safe to ignore when buying. |
On a DDR3 module the form-factor letter sits straight after the bandwidth:
PC3L-12800S is a low-voltage 1600MHz SODIMM, PC3-10600R a 1333MHz
registered server module.
The second line: the part number
The manufacturer’s code encodes the same facts in its own scheme, and it is the string to search for when you want an identical module. The three makers behind most of the world’s memory each have a readable pattern.
Samsung: M471A1K43DB1-CTD
| M471 | The family gives the form factor. M471 SODIMM, M378 desktop UDIMM, M391 ECC UDIMM, M393 registered RDIMM, M386 load-reduced LRDIMM, M474 ECC SODIMM. |
|---|---|
| A | The generation: A is DDR4 (M471A), B DDR3 (M471B). DDR5 parts are the M425 (SODIMM), M323 (UDIMM) and M321 (RDIMM) families. |
| 1K43 | Density and organisation; 1K43 is 8GB 1Rx8, 2K43 is 16GB 2Rx8, 1G44 is 8GB 1Rx16, 2G40 (on M393) is 16GB 2Rx4. |
| -CTD | The speed suffix: -CPB 2133, -CRC 2400, -CTD 2666, -CVF 2933, -CWE 3200. |
SK hynix: HMA81GS6CJR8N-VK
| HMA | HMA is DDR4, HMT DDR3, HMC DDR5. HMAA is DDR4 at the highest densities (32GB and 64GB). |
|---|---|
| 81G | The first character is the chip density (4 for 4Gb chips, 8 for 8Gb, A for 16Gb) and the next two are the module capacity: 51 4GB, 1G 8GB, 2G 16GB, 4G 32GB, 8G 64GB. So HMA81G and HMA41G are both 8GB, built from 8Gb and 4Gb chips respectively. |
| S6 | Form factor and ECC. The letter: S SODIMM, U UDIMM, R RDIMM, L LRDIMM. The digit: 6 is 64-bit, i.e. non-ECC; 7 is 72-bit, i.e. ECC. So HMA82GS7 is an ECC SODIMM and HMA82GS6 is not. |
| CJR8N | Die revision and organisation; the R8 or R4 gives the chip width, and the letters before it the chip generation. Two modules differing only here are interchangeable. |
| -VK | Speed: -TF 2133, -UH 2400, -VK 2666, -WE 2933, -XN 3200. |
Micron: MTA8ATF1G64HZ-2G6
| MTA | A Micron DDR4 module (MT plus the A for DDR4; DDR3 modules start MT without it; DDR5 starts MTC). |
|---|---|
| 8 | Number of DRAM chips: 8 chips of x8 is single-rank, 16 chips dual-rank; 9, 18 and 36 chips mean an ECC module. |
| ATF1G64 | 1G64 is 1 gigabit deep by 64 bits wide — a non-ECC 8GB module. 2G64 is 16GB; 2G72 or 4G72 is a 72-bit ECC module. |
| HZ | Form factor: HZ SODIMM, AZ UDIMM, PZ RDIMM, LZ LRDIMM, EZ ECC UDIMM. |
| -2G6 | Speed: -2G1 2133, -2G3 2400, -2G6 2666, -2G9 2933, -3G2 3200. |
Crucial modules carry both a Crucial code (CT8G4SFS8266 — 8G capacity, 4 for DDR4, S for SODIMM, 8266 for 2666) and, being Micron’s retail brand, usually a Micron MTA number as well.
Other labels on the same module
Modules pulled from branded machines often carry a second sticker with the system
maker’s own part number: Dell (SNP… or a 5-character code), HP
(a 6-digit number with -001), Lenovo (01AG… or an
FRU number), Cisco (UCS-…). These identify the module as an
OEM spare and are what a server administrator searches for. They change nothing about the
module itself, which is a standard part underneath.
Why we photograph the label
Every listing on this site shows the label of the actual module or batch, because the label
is the specification. If the photo says PC4-2666V-SA1, that is what you receive.
Try it on the laptop memory and server
memory pages — the part number in the title is the one in the picture.
Something here not match what you are seeing? Tell us — we would rather correct a guide than process a return.